Close Topic Options

Due to money complications, I had to put the project on hold and change some things. The supra n/a had problems so i let it go im in the search of a 3rd gen turbo supra now, should come in a month or so. As of now im gathering parts i will take pics as they arrive so please feel free to enjoy

The list has changed abit
Stage 1

Possible Engine Rebuild

Tanabe Hyper Medallion Exhaust System $502 (ordered 3/24/07)













Kill Switches

Alarm

Apex’i Power Intake System $118 (ordering in 2 weeks)

HKS SSQ Blow off Valve $271 (attained)


Rotora Brake Rotors Front and Rear $315

HKS 3000 Pipe (Got lucky and found a source) $110 shipped

JDM Fog Lights (Yellow bulbs)


Stage 2

JZA70 Front Lip $245

Spearco Replica Intercooler /w Piping $1450

Cooleeze Radiator Piping $90

Bomex Whale Tail (shipping from japan) $350

JUN Cam Gears



Stage Three

17x8 Compomotive CXN +35mm Offset 245/40/17 (x4) (Powder coated spokes (gold), polished lip) - one of the last things ill do. $2100

Midnight Blue Paint Job (Complete),
Custom JDM License Plate (Plate Color: White Aluminum, Letter Color: Bright Green, Region: Gunma, Symbol: “Ni”, Top Digits: 77, Plate #: 37-586) <-- Thought id do this for the initial d fans, see if you can finger out what car these plates belong to.

Recaro Pole Position Racing Buckets x2 $1240

Titan Motorsport’s Harnessbar

Sparco Clubman Seat Belt Harnesses

Universal 4 Point Bolt In - Black #103963 x2 $230



Side Stuff

Convert interior to gray (if not grey already


This post has been edited by JDMMA70 on Jun 9 2007, 08:15 PM

That sounds like a tasty little project sir!:) Keep us posted..

Thanks my goal is to get this car to handle/slide and get around the 170mph mark on the stock turbo.

Looks like a really nice project. It's always fun to see projects coming together slowly, gives you a nice sense of accomplishment. 170 shouldn't be that hard in any turbo Supra, I've buried the needle in stock Integras at around 125, and I've gone 165 in a near stock e34 525i. Lightening is the key. How much hp are you shooting for?

thanks ill keep you guys updated and 290hp to 320hp at the wheels

Out of curiousity, will the problem be going 170 mph or keeping some degree of control over what the car is doing or might do at 170?

Build the head! The 7M is pretty much limited to around 140-150 because the valves overlap around 6.5k. Trust me, I've hit that limit many, many times in my N/A. Of course at that point you can't feel the front wheels anymore. Good luck with the build!

Ill retain the stock head being the valves and the head are slightly diffrent on the turbo 7M's which is why the Turbo A could do 170+ easily which uses the same engine. But I will change the head gasket haha

Well lookie what came in today not sure if this counts as a mod lol but it will sure help the looks.

















This post has been edited by JDMMA70 on Jun 9 2007, 08:11 PM

Ooooooo, what is it?

*doesn't know a thing about your MA70*

And in the continuation of the FF7 theme I use for when ppl get stuff for their cars:

*cues FF7 Victory Theme*

Item Get: MA70 Gauge Cluster Cover
XP Get: 768 XP



Edited: thnx for the correction for what it is.

This post has been edited by Zanaduz on Apr 30 2007, 08:38 AM

its a gauge cluster cover

Its been a while but the car is finally running good. I got the exhaust put on, and i got some suspension parts coming through the mail. Here are some pics enjoy.

Any updates on this?

For what its worth- if you go through the shinanigans of rebuilding the engine, do yoruself a good favor and O-ring that block- Then sigh with relief as the fear of headgasket problems goes out the window

Big update plus some carnage.

Well i got into an accident not a big one but an old lady decide her eclipse was small enough to park beside me even though a F150 was less than 2 ft away!

Long story short she realized this and back out in the process hitting my driver side quater panel.

Damage was minimum for me but her door was FUBARD





On the way to TX2K8 Supra Nationals i blew and intercooler hose and if anyone has done this running an AFM knows what a pain it is. I went through 2 sets of spark plugs just to make it back home a 60mile trip, though the 7M took it like a champ.







This replaced the lower Hose



Pics from TX2K8



My car next to my friend Steven 89 Supra

This is what happens to Stainless Steel) when you have Flames shooting out the exhaust (Fireballs is a better word for this







Thankfully with some Blue Away and good metal polish she'll come right back.











Also Picked up a set of ES250 Fog Light Capsules they fit perfectly in 89-92 Supras but due to me being Pre89 i had to bastardize them to get them to fit.





Now to new mods.

HKS Downpipe Used $30


BIC Test Pipe w/ Gasket $98
Pics coming soon as its in the mail

HKS Turbo Timer Harness $28
Pics coming soon as its in the mail

HKS Turbo Timer Type 1
Pics coming soon as its in the mail

My friend recently purchased his project car a 93 240SX



This post has been edited by JDMMA70 on Jun 2 2008, 08:50 AM

thumbs up for the supra.

BTW 2 sets of plugs? did they foul up? You just need a wire brush.

well i didnt have a set of tools with me so i couldnt clean them but shes running smoothly now

New Toys Came in.

HKS Type 1 TT Limited






BIC Test Pipe (I love Canada)


Coming Soon

Tokico Illumina II's (So i can retain TEMS)
BBS RS 17x9 or 17x10 Rims Havent found a set i like yet with the offset i want.
Either those or 5Zigen FN01R-C.

HKS EVC 3 to replace my GReddy profec B which is pissing me off at the moment i think the solenoid is bad or my wastegate is F**Ked.

Beautiful car JDMMA70!

I must say, I particularly love the two-tone paint job. It looks very unique. If you dont mind me asking, what do you plan on using this car for? Keep me and the other WM members posted, I would love to see the cars progress.

Mike
"HateSkylines"

mk3 are capable of 170mph with minor mods?

Stock they can hit speeds up to 145-150mph minor mods and a long stretch of road and it will get there, now when i said that i did not mean in a matter of seconds may take 20 seconds to get there who knows.

By minor i mean
Intake
Intercooler
Full Exhaust
Boost Controller set to 12psi

Few guys ive seen hit 155-165+ (just ran out of road)

for some reason that supra looks way to famliar. Dont tell me the interior tan and its a auto?yeah i blame the weight of car taking so long. Will you be striping it later on?

very nice supra..

i believe that stainless steel turns that way just because of heat. my stainless steel headers turnt into that within a day of running.

their a different in minor mods compare na and fi(mainly turbo). na gets the header, turbo gets the boost controller.

nice list of mods building up on that supra.

Its actually Blue Interior hah, im the only Supra in Texas that i know of that has this color combo.

So installed so far.

HKS Turbo Timer

and i also installed this nice little goody that came from Japan two days ago

Defi Blue Racer Boost Gauge

F-CON would go tasty on the supra